Photos of iPhone 6S' final assembly were leaked recently and prior to that, the front and the back panel of the phone were also leaked. However, it wasn't just the images of the phone itself that are making waves in the leaked photo department but the phone's other components too, such as camera rings, flex cable, and home button holder.
PhoneArena wrote that the components were leaked overseas and the phone related accessories did veer away from what the iPhone 6 has. The camera ring is exactly the same as what the current model has and the only difference is the color, the about to be released camera ring will be colored in gold.
Another component that was leaked was the phone's Flex Cable. The iPhone 6 used a disassociated Flex Cables, but the iPhone 6s will use a single Flex Cable which includes the mute button, volume, flash, and power. The single flex cable was first introduced in the iPhone 4 eras, MacRumors reported.
The iPhone 6s and iPhone 6s Plus will be released this coming September, a month later than Samsung's release of their flagship device the Samsung Galaxy Note 5.
In related news, Inferse confirmed that the iPhone 6s will be a bit thicker than the iPhone 6 by .2mm due to iPhone 6S' Force Touch Technology, the old iPhone 6 is at 6.9mm while the about the released iPhone 6S will be at 7.1mm. The 7.1 mm profile of the iPhone 6s was also rumored to match the iPhone 6s Plus's profile.
The Force Touch Technology will be the iPhone 6s and iPhone 6S Plus newest technology addition which was first introduced in Apple's iWatch and recently published MacBooks. The technology is a sensor which distinguishes a light tap from a hard press, which corresponds to a certain command, like the iWatch wherein the light tap will prompt the phone to change its face.
Join the Conversation