TeamAndroid.com and TeamUB members gave Android 5.1.1 custom ROMs for Samsung Galaxy S4 and Galaxy Note 2 devices recently to customize S4 devices in every possible way and improve Note 2 user experience.
The custom ROM for the Galaxy S4 would bring features such as disabled tether checking, IME selector notification control, advanced reboot, and many more. The custom ROM for the Galaxy Note 2, on the other hand, brings features such as OTA updates, centre clock, battery percent in the status bar, and others.
Android 5.1.1 custom ROM for Galaxy S4 I9500 installation guide
A TeamAndroid.com member, EuphoriaOS, gave an Android 5.1.1 custom ROM for the Galaxy S4 I9500. This custom ROM is AOSP based and enables device owners to customize the device in "every possible way."
A pre-built SuperUser was also given so that users can get root access when flashing the custom ROM. Device owners can as well choose to disable Carrier logo on lockscreen.
Additional features include:
- AOSP Based
- Un-encrypted
- Disabled tether checking
- IME selector notification control
- Advanced reboot
- Adb notification control
- Adb over network
- Long press back to kill
- CPU info overlay
- Status bar brightness control
- Superuser built in
- Show battery percent
- Option to disable lock screen carrier label
Users are advised to back up all data since the custom ROM would erase everything.
Disclaimer: The procedure is very technical and should be performed by a person with sound knowledge of rooting (or manual software installation) Android devices. If the step-by-step installation process is not followed properly, there are chances of the smartphone getting bricked or being permanently irreparable. VcPost and any source giving the installation cannot be held responsible for any damage or claims from readers if the procedure does not yield the required results or if the device is bricked. Hence, users are advised to proceed with caution.
To continue with the installation, click this.
Android 5.1.1 custom ROM for Galaxy Note 2 installation guide
A stable TeamUB Android 5.1.1 custom ROM is also available for Samsung Galaxy Note 2 devices, and it brings loads of following features such as OTA updates, centre clock, battery percent in the status bar, and many more.
Users are also advised to do first the following:
- Backup any important datafrom your Samsung GalaxyNote 2 as a complete wipe will be required during the flashing process.
- Enable USB debugging option on your device:Settings>DevelopmentOptions>USB debugging.
- Samsung GalaxyNote 2must berooted, unlocked and installed with a recovery tool likeTWRPorCWM.
- Your device must be charged to at least 60% of power.
Disclaimer: The procedure is very technical and should be performed by a person with sound knowledge of rooting (or manual software installation) Android devices. If the step-by-step installation process is not followed properly, there are chances of the smartphone getting bricked or being permanently irreparable. VcPost and any source giving the installation cannot be held responsible for any damage or claims from readers if the procedure does not yield the required results or if the device is bricked. Hence, users are advised to proceed with caution.
To continue with the installation, click this.
Join the Conversation